ELP Series – Low Pressure Transmitter
- Ranges available: 1” though 20”, 250 through 5000 Pa
- Two jumper selectable ranges per model
- Jumper selectable current or voltage output
- Polycarbonate enclosure with hinged and gasketed cover
Air Pressure Switches and Transmitters
Showing all 9 results
EUP Series – Ultra Low Pressure Transmitter
- Ranges between 0.1”WC and 0.4”WC (25 Pa and 100 Pa)
- 6 selectable pressure ranges
- Polycarbonate enclosure with hinged and gasketed cover
LP Series – Low Pressure Transmitter
- Jumper selectable 2 wire currnet and 3 wire volatge outputs
- 24 Vac/dc power supply
- Six variable jumper selectable pressure ranges, W.C.
- Hinged Polycarbonate weatherproof enclosure
RPC Series – Room Pressure Monitor w/ Analog or BACnet
Ranges ± 1″ W.C. to ± 0.125 “wc W.C. (± 250 Pa to ± 30 Pa)
Field selectable outputs
Precision silicon sensor
24 Vac/dc power supply standard
Functional and attractive enclosure
LCD display & alarm output
Optional BACnet Communications
UP Series – Ultra Low Pressure Transmitter
- Ranges between -0.125”WC and 1”WC (-30 Pa and 250 Pa)
- Analog output or BACnet® communications
- 4 selectable pressure ranges on analog model
- 2 selectable pressure ranges on BACnet® model
- 3 switch selectable current or voltage outputs
- LCD display
- Optional alarm relay output
- Polycarbonate enclosure with hinged and gasketed cover
CR3 – Cleanroom Monitor
Humidity, Temperature & Pressure
BACnet®, Modbus or Analog Outputs
In-room or Remote Monitoring
Individual alarms for ALL parameters
Large Easy-To-Read Display
GFS Series – Air Differential Pressure Switch
Contains a diaphragm, a calibration knob and a snap-acting SPDT switch.
2 connections accept 6.35mm(0.25″)OD tubing.
Enclosure cover guard against accidental contact.
Will accept a 12.7 mm (0.5″) conduit connection or M20 connection.
GFS-MP Series – Air Differential Pressure Switch (Multi-Pack)
Available August 1, 2019
- 45 Piece multi-pack
- Contains a diaphragm, a calibration knob and a snap-acting SPDT switch.
- 2 connections accept 6.35mm(0.25″)OD tubing.
- Enclosure cover guard against accidental contact.
- Will accept a 12.7 mm (0.5″) conduit connection or M20 connection.
AFS Series – Air Differential Pressure Switch
The plated housing contains a diaphragm, a calibration spring and a snap-acting SPDT switch.
The sample connections located on each side of the diaphragm accept 6.35mm(0.25″) OD tubing via the integral compression ferrule and nut or barbed fitting.
An enclosure cover guards against accidental contact with the live switch terminal screws and the set point adjusting screw.The enclosure cover will accept a 12.7 mm (0.5″) conduit connection.
Optional pressure ranges and manual resets available.